CFD vs FEA: Which Question Each Answers, and When You Need Both
CFD vs FEA: why fluids use finite volumes and solids finite elements, where heat transfer joins them, and how a CFD error becomes a stress error.
Нийтлэл уншихCFD, загварын нотолгоо, симуляци хийхээсээ өмнө асуух ёстой асуултуудын тухай практик зөвлөмж.
Энэ нийтлэл таны хэл дээр хараахан орчуулагдаагүй байна; эх англи хэл дээр харуулж байна.
CFD vs FEA: why fluids use finite volumes and solids finite elements, where heat transfer joins them, and how a CFD error becomes a stress error.
Нийтлэл уншихA data centre liquid cooling CFD model spans the cold plate, the rack loop and the room. What each must capture, with a worked energy balance and common traps.
Нийтлэл уншихA GPU CFD solver pays off when the case fits in memory, uses supported models and is big enough. How to check all three, and how to verify the GPU result.
Нийтлэл уншихResiduals fell three orders and the answer is still moving. Learn three checks that show a CFD solution has converged, with a worked example and a checklist.
Нийтлэл уншихEjector CFD depends heavily on the turbulence model. See what a published validation reports for k-omega SST, where it is weaker, and how to compare designs.
Нийтлэл уншихCFD has no single accuracy figure. See where the error comes from, what a published validation reports, and how to decide what error your decision can tolerate.
Нийтлэл уншихChoosing between k-omega SST and k-epsilon depends on how you treat the wall. Compare the two models, see which y+ each needs, and calculate the first cell height.
Нийтлэл уншихA step-by-step mesh independence study: three meshes, the refinement ratio, the observed order and the grid convergence index, ending in one sentence for your report.
Нийтлэл уншихA converged CFD solution is a starting point. Numerical checks and comparison with physical evidence answer different questions about a model.
Нийтлэл унших